** We will be closing for the Holidays from 21st December - 2nd January 2025 **

BIFROST  2/64

BIFROST 2/64

£780
VAT already included
In Stock

Bifrost 2/64 is a complete re-thinking of what an accessible DAC can be. With full hardware-balanced topology, balanced and single-ended outputs, remote control, Schiit’s unique True Multibit™ architecture with a time-and frequency-domain optimised digital filter, NOS mode, and our own Unison USB™ input and easy-to-upgrade Autonomy™ platform, Bifrost sets all the standards.

Top-Of-Class Hardware Balanced Design

Just like our range-topping Yggdrasil, the Bifrost 2/64 features a fully hardware balanced architecture. This means four 16-bit DACs total, with one DAC for each phase. You can expect the same stellar performance from both the XLR and RCA outputs, so Bifrost 2/64 works seamlessly with your system.

Featuring Schiit's Unique True Multibit™ — and NOS

Like all Schiit True Multibit products, Bifrost 2/64 uses completely unique D/A converters and our proprietary time- and frequency-domain optimised digital filter. In the case of Bifrost 2/64, four DAC8812 D/A converters—the same basic chip used in Yggdrasil Less is More—do the conversion, while the digital filter is implemented on an Analog Devices SHARC DSP. You can also choose non-oversampling mode (NOS) to bypass the digital filter entirely.

Unison USB™ is USB, Elevated

Bifrost 2/64 features Unison USB, our own USB input based on a general-purpose PIC32 microprocessor, using precision local clocks and complete electromagnetic and electrostatic isolation. No more off-the-shelf USB—this unique, UAC2-compliant input provides the highest performance and lowest power draw of any USB input we’ve offered to date. 

Easy Upgrades with Autonomy™ Architecture

Slide-in hardware modules and a MicroSD card slot means this DAC never has to come back to Schiit for upgrades. Compare this to other DACs, even DACs costing many times more—only Bifrost 2/64 provides complete hardware and firmware upgradability. All original Bifrost 2s can be upgraded to 2/64 with a new card and firmware, available on our Upgrades page.

Designed and Assembled in USA

By “designed and assembled in USA" what this means: the vast majority of the total production of Bifrost—chassis, boards, transformers, assembly, etc—are manufactured in the US. The chassis are made minutes from the Schiit facility. The PCBs are done just over the hill from the factory, or done in NorCal. The transformers are also made in California. They are not just putting in the last screws and calling it done.  

5-Year Warranty

Bifrost 2 is covered by a 5-year limited warranty that covers parts and labour.

Firmware upgrades Click Here 

Balanced or SE Output:


Frequency Response: 20Hz-20KHz, +/-0.02dB

THD+N: <0.0008%

IMD: <0.0006%, CCIF

S/N: > 124dB, referenced to full output

Crosstalk: -132dB, 20-20kHz


Maximum Output: 2.0V RMS single-ended, 4.0V RMS balanced


Inputs: Coaxial SPDIF, Optical SPDIF, USB 


Input Capability: up to 24/192 for all inputs


Input Receiver

SPDIF: AK4113

USB: Schiit Unison™ USB


Outputs: RCA (single-ended) and XLR (balanced)

Output Impedance: 75 ohms for both


Conversion Type: Schiit True Multibit™ 

D/A Conversion IC: Texas Instruments DAC8812 x 4  

Digital Filter: proprietary Schiit time- and frequency-domain optimised digital filter implemented on Analog Devices SHARC DSP processor, running 8X oversampling

Analog Stage: Differential, based on LME49724 and OPA1656


Power supply: 24VA transformer, 8 stages of regulation, including discrete regulation for the analog card and separate supplies for critical digital and analog sections

Upgradability: Autonomy™ architecture with externally replaceable DAC/Analog Card and USB Input Card, plus MicroSD card slot for firmware updates


Remote control: included, controls source selection, phase invert, and mute.


Power supply: 24VA transformer,8 stages of regulation, including separate supplies for critical digital and analog sections


Upgradability: Autonomy™ architecture with externally replaceable DAC/Analog Card and USB Input Card, plus MicroSD card slot for firmware updates

Remote control: included, controls source selection, phase invert, and mute.

Power Consumption: 12 Watts

Size: 22.86 x 17.15 x 5.08 Cm

Weight: 2.27Kgs

    Bad           Good